Motorola Business Two Way Radio Accessories

The MOC4600i Wireless Message Alert Device is a one-touch messaging system. When the service button is pushed a pre-recorded message will be sent to your two-way radios, and a green light displays on the device, informing the customer that a message has been sent.

The RocketScience Titan is an adjustable, heavy duty headset that is perfect for many situations. A K-Cord is required.

• Extreme noise cancelling dual muff headest
• Heavy duty, adjustable headset
• Push-to-talk button on plastic earshell
• 24db NRR mechanical boom microphone
• Requires a RocketScience K-Cord to connect to a two way radio. Sold seperately.
• Color may be different than item pictured

The Motorola RLN6309 multi-unit charger works with all RDX series radios, and allows you to charge a fleet of up to 6 radios at once. This unit will fully charge a battery in 3-6 hours, depending upon the battery capacity. The RLN6309 is capable of being wall mounted, and can charge a battery alone or connected to a radio. This charger also supports cloning, allowing you to easily copy settings from one radio to another!

Works with all Motorola RDX series business radios.

The Motorola 53879 multi-unit charger works with XTN series radios, and allows you to charge a fleet of up to 6 radios at once. This unit will fully charge an XTN radio in 6 hours. The Motorola 53879 charger also supports cloning, allowing you to easily copy settings from one radio to another!

Works with Motorola XTN series business radios, including: XU1100, XU2100, XU2600, XV1100, XV2100, and XV2600.

The Motorola 53960 multi-unit charger works with all DTR series radios, and allows you to charge a fleet of up to 6 radios at once.

Works with all Motorola DTR series radios.

The RocketScience Comet is an adjustable, heavy duty headset that is perfect for many situations. A K-Cord is required.

• Single muff
• Heavy duty, adjustable headset
• NEXUS Push-to-talk button on ABS plastic earshell
• Noise cancelling boom microphone
• Requires a RocketScience K-Cord to connect to a two way radio. Sold seperately.

Enjoy your two way radio without wires! Blu-Comm is the worlds first bluetooth enabled two way radio accessory. It consists of three parts: a bluetooth headset, a wireless push-to-talk button with lapel clip, and a small transmitter that connects to the radio. The Blu-Comm gives you the freedom to communicate through a discrete headset, without the hassle of dealing with wires or limitations on placement of a push-to-talk button.

The Blucomm headset kit is battery powered, and provides up to 5 hours of talk time and up to 200 hours of standby time. The Bluecomm headset can be fully recharged in 2 hours.

Works with Motorola AX, GP, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The Motorola 56531 multi-unit charger works with CLS series radios, and allows you to charge a fleet of up to 6 radios at once. The Motorola 56531 charger also supports cloning, allowing you to easily copy settings from one radio to another!

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

The Motorola RLN6305 high capacity lithium ion rechargeable battery typically provides up to 26 hours of use with a 2 watt radio and 18.5 hours of use with a 4/5 watt model.

Works with all Motorola RDX series business radios.

The Motorola RLN6305 high capacity lithium ion rechargeable battery typically provides up to 24 hours of use with a 2 watt radio and 17 hours of use with a 4/5 watt model.

Works with all Motorola RDX series business radios.

This Motorola RMN5114 temple transducer headset is the newest in headset technology. It features high performance bone vibration speakers for clear audio reception. The RMN5114 uses a discrete, lightweight and streamlined "ear loop" that rests comfortably against the head, providing the bone conduction technology.

Unlike conventional headsets, the RMN5114 temple transducer allows the user's ears to be uncovered and completely free to hear normal sounds, while still using a two way radio. An in-line push-to-talk button and microphone frees the user from hlding the radio while communicating.

Compatible with all Motorola AX, CLS, DTR, RDX, and XTN series business radios.

The XLT HS300-MB1 Headset with Boom Mic features a comfortable muff style design. The boom mic is flexible, and the headset also has a PTT switch and is VOX capable.

• Padded adjustable frame and speakers
• Adjustable boom microphone
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The Motorola RLN6351 lithium ion rechargeable battery replaces the standard battery included with 2 watt RDX series models. It typically provides up to 12 hours of use with a 2 watt radio and 8.5 hours of use with a 4/5 watt model.

Works with all Motorola RDX series business radios.

The RocketScience Sentry-M1 surveillance headset is a heavy duty headset designed for discreet communications. The in-ear speaker is small and is connected to clear tubing, which is less noticable.

• Transparent tube connects to earpiece speaker
• Speaker fits directly into ear
• Dual Push-to-talk buttons for Redundancy
• 3 Lapel clips keep wire in place
• Great for police, security, hotels, casinos, etc.
• Fits Motorola AX, GP, CLS, CT, DTR, SP, as well as RDX and XTN series radios, and BlackBox UHF and VHF radios.

The XLT Communications TM200-MB1 throat microphone is a tough, heavy duty solution for those needing to communication in a high noise environment. The TM200-MB1 is adjustable, allowing it to fit various neck sizes. It is a single wire throat mic, with an in-line push-to-talk (PTT) button with lapel clip. A reversible surveillance style earpiece with mushroom tipped connector will work in either ear.

• Flexible throat microphone wraps around neck and transmits from vibrations in the throat. Background noise is not transmitted.
• Throat mic is adjustable from 12 to 14 inches
• Heavy duty design
• Clear surveillance style tube wraps behind the ear with earpiece fitting securely inside the ear.
• Reversible earpiece works in either ear
• Single wire design with in-line Push-to-talk button with heavy-duty lapel clip
• Includes two clear mushroom tipped earpieces
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The Motorola 56553 drop in charger works with CLS series radios. It allows you to charge both a radio and an extra battery at the same time!

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

The Motorola 53875 drop-in charger is a rapid charger, capable of fully charging a Motorola XTN radio in only 2 hours. Allows you to drop-in either the entire radio, or just the battery. Includes charger and AC adapter.

Works with the following Motorola XTN series business radios: XU1100, XU2100, XU2600, XV1100, XV2100, and XV2600.

This Motorola 53865 headset provides a comfortable way to communicate with your Motorola business radio. The headset provides one speaker, and a boom microphone extends from the headset and will swivel up or down.

Compatible with the following Motorola business radios: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410 and RDX series.

• Motorola RDX series rapid battery charger - model RLN6304
• Fully charges battery in approximately 1.5 to 3.5 hours hours, based on battery capacity.
• Compatible with all batteries for Motorola RDX series radios
• Charges battery alone, or attached to radio
• Includes charging tray, power supply, and adapters for both North American and European outlets.

The Motorola 53963 lithium ion rechargeable battery replaces the standard battery included with the DTR410 and DTR510. It typically provides up to 14.5 hours of battery life on a full charge.

Works with all Motorola DTR series business radios.

• Motorola hard leather case model RLN6302A
• Made from extremely tough leather, meeting the highest durability standards
• Twist-release belt loop
• Great for tough work environments!

• NiMH rechargeable battery
• Compatible with Motorola AX series radios, including: AXU4100, AXV5100

The SE200-MB1 heavy duty two wire surveillance earpiece is a great option when discrete communications are required. The SE200-MB1 features a quick release style mushroom tipped surveillance earpiece. A Push-to-talk (PTT) button / microphone is on a separate extended length wire that can be clipped to your lapel (clip included), hidden inside a pocket, or routed down a sleeve.

• Transparent "surveillance style" tube connects to earpiece speaker
• Clear, mushroom shaped speaker fits directly into ear
• Quick release connector for earpiece tube
• Push-to-talk button is attached to separate extended length wire.
• Push-to-talk button can be clipped to lapel, stored inside a pocket, or fed down a sleeve and held in hand (for "secret service" style communications)
• Heavy duty lapel clips attached to both PTT button and base of earpiece
• Earpiece wire: 40 inches. PTT wire: 52 inches. Both are measured from the radio connector.
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, RDX, SP, and XTN series radios, and BlackBox UHF and VHF radios.

The HS150-MB1 headset from XLT Communications was designed with your comfort and convenience in mind. This lightweight headset is padded and adjustable, making it comfortable even when worn for long periods of time. The HS150-MB1 also supports both hands-free VOX and push-to-talk modes.

• Soft plastic adjustable frame with soft padded speaker and support arm
• Adjustable boom microphone
• Works in right or left ear
• Supports hands-free (VOX) or push to talk operation
• Push-to-talk button
• Medium-duty lapel clip
• Great for individuals who need a stable headset, or where maximum comfort is important, such as where an earpiece is needed for long stretches of time
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, RDX, SP, and XTN series radios, and BlackBox UHF and VHF radios.

The HM200-MB1 headset from XLT Communications was designed specifically to be used with helmets on vehicles, such as motorcycles, bikes or four wheelers. Two small, padded speakers mount inside the helmet along with a boom mic. A push-to-talk button is designed to be mounted on a handlebar grip for easy access.

• Designed specifically for use with motorocycles and other vehicles where helmets would be used
• Speakers and dot microphone go inside helmet
• Push-to-talk (PTT) button mounts on handlebar using Velcro strap (included)
• Extra long cable
• Simple installation
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, RDX, SP, and XTN series radios, and BlackBox UHF and VHF radios.

Talk and listen without having to remove your Motorola business radio from your belt. The earbud conveniently fits in the ear and delivers great sound even in noisy places. Tiny push-to-talk microphone conveniently clips to collar.

Compatible with the following Motorola business radios: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410 and RDX series.

The Motorola RKN4155A programming cable allows you to connect your Motorola RDX series radio to your PC and change settings using the CPS software.

Works with Motorola RDX series business radios, including: RDU2020, RDU2080d, RDU4100, RDU4160d, RDV2020, RDV2080d, and RDV5100.

The RocketScience Flare-M1 shoulder microphone is a good choice for those needing a small, compact remote mic. The Flare also offers a unique 3.5mm audio port. If a "listen only" headset (such as the RocketScience Shadow) is connected to this port, all sound will be directed to the headset.

• Compact size - Only 2.5 inches tall
• Rotating steel clip
• Push-to-talk button
• Strong strain relief
• 3.5mm Audio port for earpiece (such as RocketScience Shadow)
• Thick, heavy duty cable
• Small and durable
• High sound quality
• Fits Motorola AX, GP, CLS, CT, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The XLT Communications TM100-MB1 throat microphone is the perfect device for those in high noise environments. This is a two-wire throat mic, with the wire for the push-to-talk (PTT) button split away to attach to your finger. This is a great option for paintball players, or for other situation where the hands are not free to reach for the talk button. A clear surveillance style earpiece with mushroom tipped connector fits securely inside the ear.

• Flexible throat microphone wraps around neck and transmits from vibrations in the throat. Background noise is not transmitted.
• Clear surveillance style tube wraps behind the ear with earpiece fitting securely inside the ear.
• Two-wire design allows Push-to-talk button to be attached to finger (or other location) for ultimate convenience (round hook and loop fastener included)
• Includes two mushroom tipped earpieces (one clear, one peach)
• Great for those needing a flexible location for the push-to-talk button, such as paintball players, or for those in high wind / noise environments
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

• Replacement Radio Connector Cable
• Works with RocketScience Titan, Comet, and Armada headsets
• Compatible with Motorola GP, CT, DTR, SP, CLS, XTN, RDX and AX series radios, and all Blackbox radios.

The RocketScience Shadow-C is a "listen only" earpiece designed to work with compatible radios or remote speaker microphones (such as the RocketScience Flare).

• Transparent tube connects to earpiece speaker
• Speaker fits directly into ear
• 2 Lapel clips to secure cord
• 12 inch cord
• 3.5 millimeter right-angle connector
• Perfect compliment to the RocketScience Flare shoulder microphone
• Works with any radio or remote microphone with a 3.5mm audio output jack.

The Motorola RLN6306 AA battery frame allows you to use 5 regular AA alkaline batteries to power your Motorola RDX business radio. This provides a great deal of flexibility, perfect for those situations when there's just not enough time for a recharge!

Works with all Motorola RDX series business radios.

The RLN6423A swivel earpiece is ergonomic, and easy to use. Talk and listen without having to remove your Motorola business radio from its holster. The RLN6423 earpiece fits comfortably over your ear, and an in-line push-to-talk button with swivel clip connects to your lapel. Simply press the button when you're ready to speak.

The RLN6423A is compatible with most two pin Motorola business radios including the following: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410 and RDX series.

This programming cable allows you to connect your Motorola DTR series radio to your PC and program it using the CPS software. This makes setup much easier than using the internal menus. Programming software (CPS) for the DTR series radios can be downloaded for free from www.motorola.com/dtr. Model 0105950U15. PC must be equipped with a 9-pin serial port.

Works with all Motorola DTR series business radios.

The RocketScience Star-M1 headset is the perfect choice when discreet communications is required. The in-ear speaker is small and is connected to clear tubing, which is less noticable. A lapel clip is provided with a separate Push-to-talk (PTT) button / microphone that can be concealed in a pocket.

• Transparent tube connects to earpiece speaker
• Speaker fits directly into ear
• Push-to-talk button
• Lapel clip
• Great for security, hospitality, hunting, and various other activities
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The RocketScience BodyGuard-M1 headset is a great choice when a more stable, yet still discreet earpiece is required. An earbud style speaker fits into the ear and is held securely in place by a rubber ear loop that fits comfortably over the ear. A Push-to-talk (PTT) button / microphone with lapel clip is also featured.

• Adjustable rubber earloop holds speaker securely in place.
• Works on right or left ear
• Earbud style speaker
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, SP, DTR, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The XLT HS200-MB1 Headset with Boom Mic features a comfortable behind the neck design. The boom mic is flexible, and the headset also has a PTT switch.

• Plastic frame with padded speaker
• Adjustable boom microphone
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

• 1300 mAh rechargeable battery
• Replaces Motorola PMNN4063
• Compatible with Motorola AX series radios, including: AXU4100, AXV5100

The Motorola 56557 lithium ion rechargeable battery provides up to 12 hours of battery life, more than enough for a standard work shift!

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

The RocketScience Agent-M1-CO is a very stable, comfortable earpiece with a large speaker that rests on the outside of the ear. It is a more comfortable alternative to "D" loop style earpieces, and works well in environments where several people will be sharing an earpiece.

• Adjustable rubber earloop holds speaker securely in place.
• Works on right or left ear
• Single wire earpiece
• Push-to-talk button
• Two Lapel clips allow for convenient placement of wire.
• Great for environments where earpieces are shared.
• Fits Motorola AX, CLS, CT, SP, DTR, RDX and XTN series radios, and BlackBox UHF and VHF radios.

This Motorola 53815 headset is lightweight and discrete - perfect for fast-paced work environments. Also a convenient way to speak and listen withoutholding your radio. The lightweight headset rests behind the neck, and provides one speaker. A boom microphone extends from the headset and will swivel up or down. Can be used hands-free with VOX capable Motorola radios.

Compatible with the following Motorola business radios: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410, and the RDX series.

The Motorola 53968 is a radio-to-radio cloning cable for DTR series radios. Use this cable to connect two radios, and then easily clone the settings from one unit to another!

Works with Motorola DTR series business radios.

The SE100-MB1 surveillance earpiece is the perfect option when discrete communications are required. The SE100-MB1 features a clear tube which wraps behind the ear, connecting to a clear mushroom tipped earpiece that fits securely inside the ear canal. A Push-to-talk (PTT) button / microphone can be clipped to your lapel (clip included) or hidden inside a pocket.

• Transparent tube connects to earpiece speaker
• Clear, mushroom shaped speaker fits directly into ear
• Push-to-talk button
• Lapel clip
• Perfect whenever discrete communications are required
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, RDX, SP, and XTN series radios, and BlackBox UHF and VHF radios.

The XLT Communications SM100-MB1 is a heavy duty speaker / shoulder microphone with a high stress swivel belt clip. Replaces genuine Motorola part # 53862 and HMN9030.

• Heavy duty speaker microphone
• High stress swivel belt clip
• Coiled cord
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The EB200-MB1 earpiece is lightweight and comfortable and remains in a stable position even while the user is mobile. An adjustable height earbud style earpiece is held in place by a soft rubber frame. A Push-to-talk (PTT) button / microphone can be clipped to your lapel (clip included) or hidden inside a pocket.

• Soft plastic frame wraps behind ear for stability
• Adjustable height earbud-style earpiece
• Works in right or left ear
• Push-to-talk button
• Lapel clip
• Great for individuals who are constantly on the move, or where an earpiece is needed for long stretches of time
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The XLT EB250-MB1 earpiece is lightweight and comfortable and remains in a stable position even while the user is mobile. An adjustable height, large sized earpiece is held in place on the outside of the ear by a soft rubber frame. This makes it great for sharing with another person.

• Soft speaker loop
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

Talk and listen without having to remove your Motorola business radio from its holster. The high quality earpiece fits comfortably over your ear, and the adjustable boom microphone provides clear transmissions. Included lapel clips allow you to keep the wire in place. This headset supports VOX hands-free communication.

Compatible with the following Motorola business radios: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410, RDX and M series.

Talk and listen without having to remove your Motorola business radio from its holster. The high quality earpiece fits comfortably over your ear, and an in-line push-to-talk button clips to your lapel. Simply press the button when you're ready to speak.

Compatible with the following Motorola business radios: AXU4100, AXV5100, CLS1110, CLS1410, CLS1450CB, CLS1450CH, XU1100, XU2100, XU2600, XV1100, XV2100, XV2600, DTR550, DTR650, DTR410 and RDX series.

• Drop in entire radio or just NiMH battery (53871)
• Fully charges battery in less than 10 hours
• Requires charging adapter (53874), not included
• Compatible with Motorola XTN series radios, including: XU1100, XU2100, XU2600, XV1100, XV2100, and XV2600.

The Motorola 56519 is a soft leather carrying case made specifically for the CLS series. It is both durable and stylish, and includes an adjustable strap that makes carrying easier.

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

The RocketScience Agent-M1-CO is a very stable earpiece with an around-the-ear "D" loop to hold the earpiece in place. The earpiece rests against the outside of the ear, which makes the Agent less intrusive than some other styles. This make the Agent a great choice when several people will be sharing an earpiece.

• Flexible rubber ear loop holds speaker securely in place.
• Works on right or left ear
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, SP, DTR, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The XLT DR100-MB1 is a very stable earpiece with an around-the-ear "D" ring style loop to hold the earpiece comfortably in place. The earpiece rests against the outside of the ear, making the DR100 less intrusive than some other styles. This model is a great choice when several people will be sharing an earpiece.

• Flexible rubber ear loop holds speaker securely in place.
• Works on right or left ear
• Comfortable for long wear
• Push-to-talk button
• Lapel clip
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

The EB100-MB1 from XLT Communications is a lightweight earbud earpiece with a Push-to-talk (PTT) microphone with lapel clip.

• Earbud earpiece with foam sock
• Works in right or left ear
• Push-to-talk button
• Lapel clip
• Great for those needing an extremely lightweight solution
• OEM packaging
• Fits Motorola AX, CLS, CT, DTR, SP, RDX and XTN series radios, and BlackBox UHF and VHF radios.

• UHF Stubby Antenna (450-470 Mhz)
• Height: 3.5"
• Works with Motorola RDX RDU4100, and RDX RDU4160 series radios

The Motorola RLN6303 is a radio-to-radio cloning cable for the RDX series. Use this cable to connect two chargers, and then easily clone the settings from one unit to another!

Works with Motorola RDX series business radios, including: RDU2020, RDU2080d, RDU4100, RDU4160d, RDV2020, RDV2080d, and RDV5100.

• NiMH rechargeable battery - 1500mAh
• Replaces Motorola 53871
• Compatible with Motorola XTN series radios, including: XU1100, XU2100, XU2600, XV1100, XV2100, XV2600

• Fully charges battery in less than 10 hours
• Compatible with Motorola XTN series radios, including: XU1100, XU2100, XU2600, XV1100, XV2100, and XV2600.

• Motorola RLN6307 belt clip
• Spring action
• Compatible with all RDX series radios

This Motorola 53821 holster with swivel belt clip works with XTN series radios. The 53821 is a heavy duty holster, designed to hold up in tough work environments.

Works with the following Motorola XTN series business radios: XU1100, XU2100, XU2600, XV1100, XV2100, and XV2600.

• Convenient twist-release connection
• Includes two mushroom tips (one clear, one peach)
• Includes lapel clip assembly
• OEM packaging
• Compatible with the XLT SE200 surveillance earpiece

Noise cancelling foam eartip for the RocketScience Star, Sentry, Stealth, Signal, Shadow, and Commander headsets. Provides up to 42dB noise reduction. Includes two Comfort Ear ear tips.

The AD-9716 Adapter from XLT Communications is used to convert devices from a Motorola 7 pin M4 connector to a 2 pin M1 connector, giving you more options for headsets.

Simply attach the adapter to your radio and tighten the screw for reinforcement. Perfect for customers that have a multi pin radio and a two pin headset or speaker mic.

Works with the following radios: HT750,HT1250, HT1250LS, HT1550, HT1550XLS, MTX850, MTX850LS, MTX8250, MTX8250LS, MTX950, MTX9250, GP140, GP320, GP328, GP338, GP340, GP360, GP380, GP640, GP680, GP1280, PRO5150, PRO7150, PRO9150

This Motorola swivel belt holster replaces the one that comes standard with CLS series radios. It is made of a polycarbonate material, and includes a swivel-capable belt clip. This model replaces the 56532.

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

This AAA battery tray allows you to use 3 regular AAA alkaline batteries in your Motorola CLS business radio. This provides a great deal of flexibility, perfect for those situations when there's just not enough time for a recharge! This model replaces the 56564.

Works with Motorola CLS series business radios, including: CLS1110, CLS1410, CLS1450CB, and CLS1450CH.

The RocketScience CLIP-L is a large sized, durable, heavy duty lapel clip. Great for the toughest jobs where you need the strongest clip available. Works with any two-way radio earpiece/headset.

• Replacement clear tube for XLT brand throat mic earpieces
• Includes one mushroom tip
• OEM packaging
• Compatible with the XLT TM100, TM200, TM300 earpieces.

• Convenient twist-release connection
• Includes two mushroom tips (one clear, one peach)
• OEM packaging
• Compatible with the XLT SE200 surveillance earpiece

• Replacement clear tube for XLT brand surveillance earpieces
• Includes one mushroom tip
• Lapel clip
• OEM packaging
• Compatible with the XLT SE100 earpiece.

The RocketScience CLIP-M is a durable, heavy duty, medium sized lapel clip. Great for tough jobs where you are finding yourself frequently replacing clips. Works with any two-way radio earpiece/headset.

Replacement mushroom style tips for XLT surveillance earpieces. Compatible with the XLT SE100 and standard sized earpieces from other manufacturers. Includes 2 mushroom tips.

The "Pinkie" replacement earpiece tip from RocketScience replaces the earpiece that is included with RocketScience and BlackBox surveillance earpieces and headsets, including the Star, Sentry, Stealth and Shadow.

Great for providing workers individual earpiece tips for shared headsets, or for replacing lost or worn tips. Made of silicon, not rubber, for true fit, feel and comfort.

Includes 2 "Pinkies".

Replacement foam socks for XLT earbuds. Compatible with the EB100 and EB200, as well as standard sized earbuds from other manufacturers. Includes 4 foam pieces.