- Home
- Business Radios
- Consumer Radios
- Accessories
- Antennas
- Antenna Analyzers
- Audio Accessories
- Batteries
- Belt Clips
- Bundles and Kits
- Cases and Holsters
- Chargers
- Coaxial Cable
- DC Power Accessories
- DC Power Supplies
- Dummy Loads
- Duplexers
- Faraday Bags
- Miscellaneous Accessories
- Mounts
- Power SWR Meters
- Programming Cables and Software
- Replacement Parts
- Solar
- Test Equipment
- By Radio Type
- By Radio Brand
- Services
- Other Products
- Buyer's Guide
- Resources
Compare (0)
You have no items to compare.
Same Day Shipping! Orders placed before 5 p.m. EST ship same day!
Details
Take the high cost out of programming your Vertex Standard or Yaesu radio with the XLT RPC-Y1-UF Painless Programming Cable!
The fact is, Vertex Standard USB programming cables are expensive. Why pay a premium for the manufacturer's programming cable when you can a quality cable that works just as well for less? The XLT RPC-Y1-UF Painless Programming Cable is a low cost alternative that just makes sense. It's not only economical, it's simple to install. It has a genuine FTDI chip inside, so installation is fast, easy and hassle-free.
The FTDI driver installs almost automatically on most Microsoft Windows PCs with just a few screen prompts. All you need to do is plug the cable into your USB port, follow the prompts, and your cable is ready for your radio in minutes!
Tired of paying full price for Vertex Standard programming cables? Connect to your radio for less with the RPC-Y1-UF Painless Programming Cable from XLT!
The fact is, Vertex Standard USB programming cables are expensive. Why pay a premium for the manufacturer's programming cable when you can a quality cable that works just as well for less? The XLT RPC-Y1-UF Painless Programming Cable is a low cost alternative that just makes sense. It's not only economical, it's simple to install. It has a genuine FTDI chip inside, so installation is fast, easy and hassle-free.
The FTDI driver installs almost automatically on most Microsoft Windows PCs with just a few screen prompts. All you need to do is plug the cable into your USB port, follow the prompts, and your cable is ready for your radio in minutes!
- XLT Painless Programming Cable
- Length: 3ft. (91.44cm)
- Genuine FTDI chip
- Model: RPC-Y1-UF
- No legacy or third-party drivers required
- A true plug-n-play solution!
- Works with Vertex VX-231, VX350, VX450, and Yaesu two way radios with single pin connectors. ***Will not work with Everge series radios!***
Tired of paying full price for Vertex Standard programming cables? Connect to your radio for less with the RPC-Y1-UF Painless Programming Cable from XLT!
Videos
Additional Information
-
Great cable review by Mark on 2/20/2021Painless to use. Plugged in drivers installed automaticity on windows. Programming radio was easy.
- Works As Advertised review by Bob on 3/11/2020
Taylor suggested using this cable to program our Vertex 264 radios. We di so on our Windows 10 computers. It takes a minute for your system to find the chip in the cable but once that occurs it works well and we were able to program our radios. Should it not work there are able suggestion on the net to look at the USB devices in your system and make any needed adjustments. Taylor is very helpful.
- Exceeds expectations review by The Green on 6/29/2017
I have a large property and the two-way radios work better than expected. The 3 mile radius definitely works. The employees are now able to respond quickly instead of using a cell phone that sometimes does not work.
- I would buy this product again. review by JgW on 12/7/2016
Home/Business
- wont buy this again review by Bruce on 4/4/2016
i tried to use this programming cable, but never got it to work out, had to pick up the programming kit from the mfg. of the radio,
- Works right out of the BOX!!!! review by Doc N7QBK on 1/29/2016
UNLIKE soooo many products I have purchased recently, THIS one WORKS right out of the box! "PAINLESS" is a perfect descriptor for this item. I have one for My Yeasu and one for my Bao-Feng Radio. BOTH truly ARE Painless.
- vertex 231 programing review by frank on 10/17/2015
no programing needed for windows. just make sure you are on the assigned port
- Thanks for the help in programming the radio. review by hunter on 4/27/2015
we use these for installing fiber to communicate to other crew members.
Write Your Own Review
Downloads
FAST SAME DAY SHIPPING
On orders placed before 5PM EST.
GUARANTEED AUTHENTIC
Authorized dealer for all our brands.
EXPERT ADVICE
Call, email, or chat with our experts.
