XLT TM200-S6 Adjustable Throat Mic
XLT TM200-S6 Adjustable Throat Mic
SKU: TM200-S6
The XLT Communications TM200-S6 throat microphone is a tough, heavy duty solution for those needing to communication in a high noise environment. The TM200-S6 is adjustable, allowing it to fit various neck sizes. It is a single wire throat mic, with an in-line push-to-talk (PTT) button with lapel clip. A reversible surveillance style earpiece with mushroom tipped connector will work in either ear.
Free Shipping
Closeout
Limited Quantity
Reduced
Discontinued
Description / XLT TM200-S6 Adjustable Throat Mic
The XLT Communications TM200-S6 throat microphone is a tough, heavy duty solution for those needing to communication in a high noise environment. The TM200-S6 is adjustable, allowing it to fit various neck sizes. It is a single wire throat mic, with an in-line push-to-talk (PTT) button with lapel clip. A reversible surveillance style earpiece with mushroom tipped connector will work in either ear.
- Flexible throat microphone wraps around neck and transmits from vibrations in the throat. Background noise is not transmitted.
- Throat mic is adjustable from 12 to 14 inches
- Heavy duty design
- Clear surveillance style tube wraps behind the ear with earpiece fitting securely inside the ear.
- Reversible earpiece works in either ear
- Single wire design with in-line Push-to-talk button with heavy-duty lapel clip
- Includes two clear mushroom tipped earpieces
- OEM packaging
- Works with Icom: F11, F14, F21, F24, F24S, F3001, F4001, F3011, F4011, F3021, and F4021 series radios
Videos
More Information
| Quantity | 1 Pack |
|---|---|
| Connector (XLT) | S6 - Icom |
Loading...
Customer Reviews
Filter reviews by:
WOrks well but there were some quality control issues.
The price is much lower than the throat microphones I purchased in the past. Unfortunately, after 20 years I had to replace the units with new ones. There was an issue with all three microphones purchased this time, nicked wiring from the production machinery. One unit had exposed wires at the edge of the connector strain relief, the other two units had issues with nicked wires in one or two other places. It would seem that the production machine caused problems every foot of wire and randomly affected different places on the microphone radio connector wire. I ended up throwing one microphone away, and putting tape on the other two. THis should not have happened and the radios are part of a boat headed offshore so there is no time to ask for new units. THis is not the supplier's fault but it is a manufacturer quality issue.
Write Your Own Review