CB Radio Feature Guide

Buyer’s Guide

CB Radio Feature Guide

Not exactly sure what a feature means? This page provides a plain-English explanation of common CB radio features and terminology.

52 features and terms explained

Browse all features A–Z

Accessory Port

An accessory port allows you to connect the radio to some type of external device. Common devices are headsets, microphones, or vehicle/wall chargers.

Back to top ↑

Adjustable Microphone Gain

Boosts the microphone output for stronger and clearer transmits.

Back to top ↑

Adjustable Output Power

Allows you to increase or decrease the transmit power of the CB radio. At a higher transmit power the signal will travel farther. In battery powered radios, users may want to lower the transmit power in order to increase battery life.

Back to top ↑

Adjustable RF Gain

Allows you to fine-tune the receiver sensitivity to pick up a signal with enough strength, but not too much background noise.

Back to top ↑

Adjustable Squelch

Changes the sensitivity of your CB radio to adjust for whatever signal strength you may be receiving. Lower squelch levels will allow you to receive transmissions from a greater distance, but these transmissions will contain more background noise. Higher squelch levels reduce the background noise, but will eliminate some weaker transmissions.

Back to top ↑

AM Output Power

Determines the amount of range your sending transmits will have on AM frequencies.

Back to top ↑

Antenna Warning Indicator

The radio displays an alert when the antenna needs to be checked.

Back to top ↑

Battery Type

Handheld CB radios are mobile devices and were intended to move around with you. Because of this all handheld CB radios operate on battery power. Some handheld CB radios take rechargeable batteries, but others just use standard alkaline batteries.

Back to top ↑

Bluetooth®

Allows you to make and receive phone calls through the CB radio with most Bluetooth® enabled phones.

Back to top ↑

Caller ID

The radio displays the number of the incoming call. If equipped with Caller ID With Voice, the radio will display the number with a voice announcement.

Back to top ↑

CB Radio Channels

Radio channels that are used for broadcasting and receiving transmits to other CB radio users in your area.

Back to top ↑

Channel Scan

Scans through CB radio frequencies to find active channels.

Back to top ↑

Clock/Timer/Alarm

The CB Radio features a clock, timer and/or alarm.

Back to top ↑

Delta-Tune

Delta-Tune allows you to fine tune incoming signals for greater clarity to reduce interference between adjacent channels.

Back to top ↑

Dimmer Control

Allows you to change the brightness of any illuminated features on the radio.

Back to top ↑

Frequency Display

The radio displays the current channel frequency.

Back to top ↑

Handheld Design

Handheld CB radios are more portable than standard CB radios, which need to be hardwired into a vehicle. A handheld CB radio can be easily moved from one vehicle to another or even used outside of a vehicle. Handheld CB radios are usually battery powered with an option to get power from a 12 volt source, such as a cigarette lighter.

Back to top ↑

Illuminated Display

Face plate on radio lights up to be easily seen in the dark.

Back to top ↑

Instant Channel Access

Buttons or switches present on the control panel for the sole purpose of selecting a pre-programmed channel, typically channels 9 and 19.

Back to top ↑

Key Lock

The key lock prevents input if the key is unintentionally pressed.

Back to top ↑

Key Tones

CB Radios with this feature play a tone whenever a button is pressed or controls are in operation.

Back to top ↑

Last Channel Memory

Automatically tunes to the last selected channel when the radio is first turned on.

Back to top ↑

Manufacturer Warranty

This is the warranty provided by the manufacturer. See manual for specific details.

Back to top ↑

Memory Channel Scan

The radio will scan a specific number of channels stored in memory.

Back to top ↑

Memory Channels

CB radios with memory locations allow you to store your frequently used channels for easy access later.

Back to top ↑

Microphone Connector

Allows you to connect the microphone to the CB unit.

Back to top ↑

NOAA Weather Channels

CB radio frequencies set aside for weather information.

Back to top ↑

Noise Blanker

Blocks certain wave-length frequencies to better identify and block interference.

Back to top ↑

Noise Canceling Microphone

The radio is equipped with a noise canceling microphone to provide clear communication when used in a noisy environment.

Back to top ↑

Public Address Capability (PA Capability)

Allows you to send out a message as a public address through an aftermarket external speaker.

Back to top ↑

Radio Check Diagnostic

The Radio Check Diagnostic mode tests radio functions such as antenna condition, battery voltage and RF power.

Back to top ↑

Rechargeable Battery Included

Some Handheld CB radios include or are compatible with rechargeable batteries. If you plan to use your radio frequently, upgrading to a model that includes rechargeable batteries will pay for itself in no time!

Back to top ↑

Remote Mount Installation System

The transceiver can be mounted remotely.

Back to top ↑

Signal Strength Meter

Allows you to observe the quality of the receiving signal.

Back to top ↑

Sound Tracker System

A noise-reduction device unique to Cobra Electronics that helps to maintain a strong, clear signal.

Back to top ↑

Special Edition

Special Edition or Limited Edition version with styling or features not included in the standard model of the same series.

Back to top ↑

SSB Channels

SSB channels, or Single Side Band channels, are the upper and lower halves of the normal 40 channels. This allows you to mix two different frequencies together to get a custom frequency, like mixing colors together.

Back to top ↑

SSB Output Power

SSB Output Power is the amount of wattage that the CB radio can transmit on while on a Single Side Band channel.

Back to top ↑

SWR CAL Meter

Lets you see the effects of the SWR Calibration to better enhance your ability to fine tune it.

Back to top ↑

SWR Calibration (SWR CAL)

SWR Calibration, or Standing Wave Ratio Calibration, lets you calibrate your CB radio’s antenna for the best reception. The lower the ratio, the better performance you will get. A 1.1:1 ratio is the best, but 1.5:1 is easier to achieve.

Back to top ↑

Tactile Controls

Tactile controls are controls that are shaped in such a way that you can tell how they are adjusted without looking at them, typically with the use of fins and flats.

Back to top ↑

Talk Back

The Talk Back feature adjusts the level of modulation talk back at the speaker during transmission.

Back to top ↑

Text-To-Speech Conversion

The radio can convert incoming text messages to speech. This feature may require a third party app.

Back to top ↑

Transmit / Receive Indicator

Usually a two-color LED used to show you when you are receiving a transmit or sending one.

Back to top ↑

Weather Alert Scan

The radio will scan for the nearest weather alert signal.

Back to top ↑

Weather Alerts

Radios that support weather alerts will pro-actively alert you when a weather alert, such as a severe weather warning, is issued in your area. This means that if you are concerned about possible severe weather, you don't have to continually monitor a weather channel. Instead you can rest assured that your radio will alert you when an alert is issued.

NOTE: Weather alerts are not yet supported by all NOAA stations.

Back to top ↑

Weather Scan

The radio will scan all weather bands to locate the strongest channel.

Back to top ↑
No features match your search. Try a different word, or clear the search to see everything.