To the best of my knowledge the wires coming out of the back of a wolf sound 1000g hermano why did I buy a stereo plug from buy two-way radios to put in the back of my mono $400 radio it does not work it does work but the volume is so reduced if you can't hardly hear it so why have an external speaker just leave it in the back of your pickup truck and hope like hell it makes it through the wall not like buy two-way radio cuz everything I bought from them so far has been fantastic but this speaker plug for your Roshan 1000g is no good

it works

I bought this for the two a radio and it is the wrong size it’s supposed to have one of the pins be smaller and it’s not not sure why this was marked it as sold this way, hoping someone from the company reads this and can reach out and satisfy and rectify the situation.

Works perfectly on myKG-1000G. Did not need the small adapter for my application. I assume the adapter is for a stereo speaker system.

Hello,
I bought the External Speaker Y Adapter for Wouxun Mobile Radios AD-2X35M-35F-M, it does work but, not well. It has low sound volume output and, one side is louder than the other. Not sure why it would be that way. I am disappointed with this product as it claimed to be made for the KG-1000 Plus.

For application with Wouxun KG1000G Plus: Your Wouxun KG-1000G Plus features a highly advanced triple-speaker matrix system: one in the main radio chassis, one in the detachable faceplate, and one built directly into the handheld DTMF microphone. Because it has three built-in speakers, the radio handles its external 3.5mm audio ports in a highly specific way: The Dual Port Split: The back of the chassis features two separate 3.5mm external speaker jacks (Speaker A and Speaker B).The Root Cause: If you plug a single external speaker into Jack A, it only broadcasts audio from the Left/A VFO side of your display screen. If a signal comes in on the Right/B side of your screen, it bypasses the external speaker entirely and plays at a much lower relative level out of the tiny microphone speaker instead. The Fix: Reviewers who don't change their radio settings assume the speaker is defective or quiet. To fix this, you must go into the Wouxun menu and adjust the Speaker Mode setting (Menu 56 - SPK-OUT) to combine channels, or use a cheap 3.5mm Y-splitter adapter to route both internal audio channels straight into your single Midland external speaker.