(800) 584-1445CONTACT US
0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

software

  • How to Clone a Motorola RDX Two Way Radio

    If you find yourself having to change radio settings every time a new radio is added to your fleet, you can probably save yourself a lot of time by learning how to clone your Motorola RDX radios. The cloning process simply copies the settings from one two way radio to another, and can be done in 3 ways.

    NOTE: For cloning to work successfully, the radios must be the same model number.

    Cloning Using a Multi-Charger
    If you already have a Motorola RLN6309 RDX multi-charger, then you're in great shape! The RLN6309 has built-in support for cloning, and the process couldn't be simpler.

    1. Be sure both the Source and Target radios have charged batteries. The multi-charger does not need to be connected to a power source.
    2. Place the Target radio (the radio that needs to have settings updated) in Pocket 1 on the charger and turn the radio ON. (Pocket 1 is on the far left when you are facing the Motorola logo).
    3. On the Source radio (the radio to copy from), hold down the PTT and SB2 buttons while turning on the radio. Continue to hold these buttons down until a tone is heard (around 3 seconds). (SB2 is the bottom button on the left side of the radio.)
    4. Place the Source radio in Pocket 2 of the multi-charger.
    5. Press and release SB1 on the Source radio to initiate cloning. A chirp sound confirms cloning was successful, a bonk sound is heard if cloning was not successful.
    6. Turn both radios OFF and then ON to exit cloning mode.

    Radio to Radio Cloning Using a Cloning Cable
    You can also clone two Motorola RDX series radios by purchasing a Motorola RLN6303 Cloning Cable. The RLN6303 allows you to connect two chargers together, and allows for radio to radio cloning.

    Before getting started, be sure that you have a fully charged battery in each radio. Also, please note that the chargers will not need to be connected to a power outlet.

    1. Unplug any power or USB cables from the chargers and connect them using the cloning cable.
    2. Place the Target radio (the radio that needs to have settings updated) in one of the chargers and turn the radio ON.
    3. On the Source radio (the radio to copy from), hold down the PTT and SB2 buttons while turning on the radio. Continue to hold these buttons down until a tone is heard (around 3 seconds). (SB2 is the bottom button on the left side of the radio.)
    4. Place the Source radio in the empty charger.
    5. Press and release SB1 on the Source radio to initiate cloning. A chirp sound confirms cloning was successful, a bonk sound is heard if cloning was not successful.
    6. Turn both radios OFF and then ON to exit cloning mode.

    Radio Cloning Using Programming Software
    You can also use the Motorola RDX programming software to essentially copy the settings from one radio to another.

    1. Download the Motorola CPS software and purchase a programming cable (instructions here).
    2. Connect a radio charger to the PC using the programming cable and launch the software.
    3. Turn Source radio (the radio to copy from) ON and place it in the charger.
    4. In the software, click the "Read Radio" button on the toolbar. This downloads the configuration from the radio.
    5. Turn Target radio (the radio that needs to have settings updated) ON and place it in the charger.
    6. In the software, click the "Write Radio" button on the toolbar. This uploads the configuration that was previously read to the new radio.

    These instructions apply to all two way radios that are part of the Motorola RDX series. Models include RDU2020, RDV2020, RDU2080d, RDV2080d, RDU4100, RDV5100, and the RDU4160d.

  • Motorola RDX Two Way Radio Programming Software

    If your business has a large fleet of Motorola RDX two way radios or has to adjust the radio settings every time a new radio is added, you can save a considerable amount of time by using the RDX series programming software. This software makes it incredibly easy to adjust the settings of a radio. You can also save a profile, and when you add a new two way radio you simply need to open the saved profile and click a toolbar button to write the profile to the new radio. Much simpler than using the radio's menu, especially on models without a display (such as the RDU2020, RDV2020, RDU4100, and RDV5100)! Even if your radio has a display (RDU2080d, RDV2080d, RDU4160d), the programming software still makes the process quicker and saves time.

    The software itself is free and the latest version can always be downloaded directly from Motorola's web site at http://www.motorolasolutions.com/rdx. You will, however, need a programming cable: the Motorola RKN4155. This cable connects to the port on the back of the radio charger, and then into a USB port on your PC. Unfortunately, this cable is proprietary, meaning a standard USB cable will not work.

2 Item(s)