Programming cables for Baofeng two way radios can be a real pain to install. Not so with the XLT Painless Programming Cable.
Installing the XLT Painless Programming Cable is extremely easy on a computer running Microsoft Windows. The installation process is so easy, in fact, that in many situations, simply plugging the cable into a USB port is all that is needed. The computer may automatically install the drivers without any prompts or input from the user at all. In mere moments the cable is ready to go and you are ready to program your two way radio.
Some systems may take a couple of minutes to find the drivers on their own and may require your input to complete some of the steps. Even so, the process is still very intuitive, easy to perform and painless.
In such a scenario, here are the Installation instructions for WIndows XP. This process also works on Windows Vista, Windows 7, Windows 8 and Windows 8.1. Windows 10 installation is usually automatic.
Plug the cable into an available USB port.
The Found New Hardware Wizard may appear.
Choose Yes, this time only and click Next.
The wizard should find the FT232R USB UART driver. This may take a minute or so, depending on your internet connection and/or your PC.
Choose Install the software automatically (Recommended) and click Next.
The wizard should install the FT232R USB UART driver.
After a few moments, the installation should complete.
Click Finish.
The Found New Hardware Wizard should appear again.
Choose Yes, this time only and click Next.
The wizard should locate the USB Serial Port. This may take a minute or so, depending on your internet connection and/or your PC.
Choose Install the software automatically (Recommended) and click Next.
The wizard should install the USB Serial Port driver.
After a few moments, the installation should complete.
Click Finish.
To verify the installation, open the Device Manager in your version of Windows and click the plus tab next to Ports (Com and LPT). Note the COM Port number.
That's it! Your XLT Painless Programming Cable is installed and ready to use.
The XLT Painless Programming Cable is currently available at Buy Two Way Radios with connectors for the following radios:
Part Number: RPC-K1-UF for Baofeng, Kenwood Wouxun
Part Number: RPC-Y1-UF for Vertex Standard and Yaesu.
Watch how easy it is to install it on a computer running Microsoft Windows 10 in this XLT Painless Programming Cable installation video!