The Wouxun KG-935H is an extremely powerful and versatile portable handheld amateur radio designed for hams who want maximum performance coupled with maximum functionality. Although it has the same look and feel of the KG-UV8H, it includes significant changes and upgrades, many of them directly taken from it's GMRS counterpart, the KG-935G Plus. Essentially, it's a ham version of the KG-935G series, so if you're a ham who is also a fan of what is considered one of the most popular GMRS radios on the market today, welcome home.
Although it shares many of the core features of the 935G Plus, the 935H is strictly a ham radio, so it only transmits on ham bands. However, unlike the UV8H, which is a dual bander, The 935H is a tri-band radio, which means that it is capable on transmitting on the 2 meter, 1.25 meter (aka 220 MHz) 70cm bands. It is also capable of transmitting at up to 8 watts. This is no cheap UV-5R. The KG-935H is a premium grade, portable handheld amateur powerhouse.
KG-935H Key Features
- Tri Band Transmit (2m/1.25m/70cm)
- 136-174.995 MHz (Receive Only)
- 222-225 MHz (Receive Only)
- 400-479.995 MHz (Receive Only)
- FM Radio
- 7 NOAA Weather Channels
- NOAA weather alerts
- 4 weather alert notifications
- Up to 999 Custom Channels
- Up to 8W Maximum Transmit Power
- High/Med/Low TX Power Levels
- Tune Specific Frequencies Directly (Frequency Mode)
- Simultaneous Dual Channel Receive
- Repeater Capable
- Standard and Non-Standard CTCSS/DCS Tones
- Split CTCSS/DCS Tone Support
- Channel Scan
- Priority Scan
- Scan Group Support
- CTCSS/DCS Tone Scan
- Favorite Channels
- Wide/Narrow Bandwidth Selectable
- Large Color Backlit LCD Dual Display
- 10 Display Color Theme Options
- Channel Name, Number or Frequency Display
- Incoming Caller ID Display
- Custom Display Messages
- Voltage Display
- Backlit Keypad
- Compander
- Scrambler
- DTMF Encoding and Decoding
- Group Call, All Call and Selective Call
- Cross Band Repeat
- Timeout Timer
- Audible Button Beeps
- English Voice Prompts
- Transmit Overtime Alarm
- Scan Add/Delete
- Busy Channel Lockout
- Selectable Battery Meter
- Low Battery Alert
- Power Saver
- VOX
- 2 Programmable Function Keys
- PF Quick Key Guide
- Stopwatch Timer
- Keypad Lock
- Built-in Flashlight
- Li-Ion Battery Pack (2600mAh)
- Rechargeable Battery Included
- Battery Charger
- USB-C Charging Port on Battery
- IP66 Waterproof
- PC Programming Support
- Drop-In Charge Capable
- Audio Accessory Connector
- Factory Reset
Programming the KG-935H
As it is with all of the standard Wouxun GMRS radios we carry, the KG-935H is fully programmable from a PC using a programming cable and the Wouxun KG-935H programming software or directly from the keypad of the radio itself. In fact, while customizing the old, legacy KG-UV8H from the keypad is fairly easy (if you can get through the manual, that is), The KG-935H is much, much easier, thanks to a better, more organized menu and a better, easier to read manual.
Direct from the radio
If you know how to program new channels and frequencies into a Wouxun KG-935G series or another Wouxun radio, you're half way there already. If not, or if you are new to programming radios altogether, The KG-935H owners manual has you covered. It was specifically written to get you up to speed quickly. The manual is written in plain English with illustrations and instructions that are easy to understand.
The KG-935H menu consists of 65 items. Default settings are bold.
| Menu # | Menu Item | Description | Option |
|---|---|---|---|
| 01 | SQUELCH | Squelch settings | 1 to 9|5 |
| 02 | TX-POWER | Output power | HIGH|MED|LOW|Varies |
| 03 | W/N | Wide/Narrow bandwidth settings | NARR (12.5k)|WIDE (25k)|Varies |
| 04* | THEME | Display Theme | WHITE-1|WHITE-2|BLACK-1|BLACK-2|COOL|RAIN|NotARubi|SKY|BTWR|CANDY |
| 05 | BRT-ACTV | Active Backlight | 1-10|8 |
| 06 | BRT-STBY | Standby Backlight | OFF|1-10|3 |
| 07* | WX-ALERT | Weather Alert | ON|OFF |
| 08 | BAT-SAVER | Battery Saver | ON|OFF |
| 09 | RX-CTCSS | Receive CTCSS Tone | OFF|1-50 |
| 10 | TX-CTCSS | Transmit CTCSS Tone | OFF|1-50 |
| 11 | RX-DCS | Receive DCS Code | OFF|1-105 +/- |
| 12 | TX-DCS | Transmit DCS Code | OFF|1-105 +/- |
| 13 | SHIFT | Frequency Shift Direction | OFF|+|- |
| 14 | OFFSET | Offset Frequency | None |
| 15 | BACK-LT | Backlight Timeout | ALWAYS OFF|ALWAYS ON|1-20S|15S |
| 16 | SCANMODE | Scan Mode | TO|CO|SE |
| 17 | SCANGRP-A | Scan Group A | ALL|1-10 |
| 18 | SCANGRP-B | Scan Group B | ALL|1-10 |
| 19 | PRI-SCAN | Priority Scan | ON|OFF |
| 20 | PRI-CH | Priority Channel | 999 Channels|CH:01 |
| 21 | SCAN-ADD | Scan Add/Delete | ON|OFF |
| 22 | TONE-SCAN | CTCSS/DCS Scanning | NONE|CTCSS|DCS |
| 23 | TONE-SAVE | CTCSS/DCS Tone Save Options | Rx|Tx|Rx+Tx |
| 24 | WX-NOTIFY | Weather Alert Notification Setting | WEATHER|ICON-ONLY|TONE|FLASH|TONE+FLASH |
| 25* | STEP | Step frequency settings | 2.5K to 100.0K|5K |
| 26 | ROGER | Roger Beep | OFF|BOT|EOT|BOTH |
| 27 | TOT | Transmit Overtime Timer | 15-900 sec (15 second increments)|60 |
| 28 | TOA | Transmit Overtime Alarm | OFF|1-10 seconds|5 |
| 29 | VOX | Voice Activated Transmit | OFF|1-10 (Level) |
| 30 | VOICE | Voice Guide | OFF|ON |
| 31 | BEEP | Button Beeps | ON|OFF |
| 32 | BUSY-LOCK | Busy Channel Lockout | ON|OFF |
| 33 | VOLTAGE | Displays Battery Voltage | None |
| 34 | BAT-TYPE | Battery Level Display Type | ICON|VOLTAGE|PERCENT |
| 35 | PF1-SHORT | Side Key PF1 Short Press Assignment | UNDEF|BACKLIGHT|DCS-SCAN|CTC-SCAN|REVERSE|TALK-A|WEATHER|STROBE|MONI|FM-RADIO|SOS|ALARM|FLASHLIGHT|SCAN|BRIGHT+|CH-FAV |
| 36 | PF1-LONG | Side Key PF1 Long Press Assignment | UNDEF|BACKLIGHT|DCS-SCAN|CTC-SCAN|REVERSE|TALK-A|WEATHER|STROBE|MONI|FM-RADIO|SOS|ALARM|FLASHLIGHT|SCAN|BRIGHT+|CH-FAV|SELEC CALL|FRQ2-PTT |
| 37 | PF2-SHORT | Side Key PF2 Short Press Assignment | UNDEF|BACKLIGHT|DCS-SCAN|CTC-SCAN|REVERSE|TALK-A|WEATHER|STROBE|MONI|FM-RADIO|SOS|ALARM|FLASHLIGHT|SCAN|BRIGHT+|CH-FAV |
| 38 | PF2-LONG | Side Key PF2 Long Press Assignment | UNDEF|BACKLIGHT|DCS-SCAN|CTC-SCAN|REVERSE|TALK-A|WEATHER|STROBE|MONI|FM-RADIO|SOS|ALARM|FLASHLIGHT|SCAN|BRIGHT+|CH-FAV|SELEC CALL|FRQ2-PTT |
| 39 | SMUTESET | Secondary Area Mute Setting | OFF|TX|RX|TX+RX |
| 40 | WORK-MODE | Work Mode settings | CH-NAME|FREQUENCY|CH-NUMBER|CH-FREQ |
| 41** | CH-NAME | Edit a channel name | Name*** |
| 42 | CH-FAV | Favorite Channel | OFF|ON |
| 43 | CH-ADD | Add Memory Channel | 999 channels |
| 44 | CH-DELETE | Delete Memory Channel | 999 channels |
| 45 | SCRAMBLE | Scrambler | OFF|SCRAM 1-8 |
| 46 | COMPANDER | Compander | ON|OFF |
| 47 | SP-MUTE | Speaker Mute | QT|QT+DTMF|QT*DTMF |
| 48 | RPT-SET | Repeater Mode | X-DIRPT|X-TWRPT |
| 49 | RPT-SPK | Repeater Speaker Setting | ON|OFF/ |
| 50 | RPT-PTT | Repeater PTT Setting | ON|OFF |
| 51 | ANI-SW | Radio ID On/Off | ON|OFF |
| 52 | ANI-EDIT | Edit Radio ID | 0-9|101 |
| 53 | SIDETONE | Sidetone Setting | OFF|DTMF|ANI|DTMF+ANI |
| 54 | ALERT | Tone Alert | 1750Hz|2100Hz|1000Hz|1450Hz |
| 55 | PTT-DLY | PTT-Delay | 100~3000ms|300ms |
| 56 | PTT-ID | Radio ID Setting | BOT|EOT|BOTH |
| 57 | RING | Ring Time | OFF|1-10 seconds|3 |
| 58 | CALLCODE | Call Code | 1-20 Groups|NONE |
| 59 | RPT-TONE | Squelch Tone | OFF|ON |
| 60 | TIMER | Stopwatch Timer | ON|OFF |
| 61 | SIM-RX | Simultaneous Receive | OFF|ON |
| 62 | AUTOLOCK | Auto Lock | OFF|ON |
| 63 | PONMSG | Power On Message | BITMAP|BATT-V |
| 64 | FM-MEM | FM Radio Memory | MEMORY|RECALL |
| 65 | RESET | Factory Reset | VFO|ALL |
Note: *The menu items in yellow are available in Frequency mode only.
**The menu item in green is available in Channel mode only.
Programming with software
The KG-935H uses the same Wouxun PCO-001 USB programming cable that works with almost all of the other handheld radios from Wouxun . Refer to the cable driver installation instructions for more information.
Of course, the Wouxun KG-935H programming software is specific to this radio and is currently available for Windows PCs only. The programming software is located under the Downloads tab on the Wouxun KG-935H product page at Buy Two Way Radios.
KG-935H Operation
The KG-935H operates in much the same way as other Wouxun handheld radios with full keypads, displays and menus. If you already have a KG-UV8H or other Wouxun radio that is field configurable, operating the KG-935H is about the same. Although some keys on the keypad may be different in label and function from some of the other models, they are not difficult to to use once you understand what they do.
The keys on the keypad and their primary functions are listed below:
| Button | Operation |
|---|---|
| MENU | Enter program menu|choose/set/save menu option |
| UP Key | Select next channel/frequency|Select menu option |
| DOWN Key | Select previous channel/frequency|Select menu option |
| EXIT | Short Press: Exit menu/cancel Long Press: Current PF Key Assignments |
| 1-SQL | Squelch menu hotkey |
| 2-PWR | Power menu hotkey |
| 3-W/N | Bandwidth menu hotkey |
| 4-THEME | Display Theme hotkey |
| 5-BRT-A | Active Backlight menu hotkey |
| 6-BRT-S | Standby Backlight menu hotkey |
| 7-W-ALT | Weather Alert menu hotkey |
| 8-SAVE | Battery Saver menu hotkey |
| 9-CTCSS | RX CTCSS Tone menu hotkey |
| 0-(None) | No hotkey function |
| *-SCAN | Short Press: Reverse Frequency Long Press: Scan |
| #-LOCK | Keypad lock key |
| AREA | Short Press: Switch primary (A/B) areas Long Press: Weather Mode |
| MODE | Switch Channel/Frequency mode |
| TDR | Short Press: Switch single/dual display mode Long Press: Enable/disable cross band repeat |
The Wouxun KG-935H takes ham radio to a whole new level. With the addition of new features such as the tri-band transmit, USB-C charging, and PF Key Quick Guide, this transceiver offers even more flexibility, programmability and ease of use than the KG-UV8H to create the ultimate Wouxun amateur experience -so far.
3 Comments
2 Item(s)