The Wouxun KG-1000G GMRS Base/Mobile Two Way Radio goes well beyond the limited capabilities of the typical GMRS radio. It transmits on 15 simplex GMRS channels and 8 GMRS repeater channels. It has NOAA weather channels and receives on multiple bands, including 2 meter, (144-148 MHz), 70cm (420-450 MHz), 6 meter (50.1-54 MHz) and airband frequencies on AM. This is a great transceiver for licensed operators who want full access to the GMRS and the ability to monitor other bands (receive only) without paying for an additional scanner or multi-band receiver.
In addition to its capabilities as as a powerful mobile GMRS radio, The KG-1000G also makes a nice base station. When connected to the Wouxun SPS31WIN, Samlex SEC-1235M or similar power supply, the KG-1000G performs quite well as a desktop GMRS transceiver. When connected to a second KG-1000G as shown in this tutorial video, the two radios can even operate as a fully functional GMRS repeater!
KG-1000G Key Features
- 22 Simplex GMRS Channels
- 8 GMRS Repeater Channels
- Built-in NOAA Weather Channels
- 50-53.995 MHz (6m) (Receive Only)
- 108-179.995 MHz VHF (Receive Only)
- 320-349.995 MHz (Receive Only)
- 400-479.995 (70cm) MHz (Receive Only)
- 700-985 MHz (Receive Only)
- AM 108-136MHz (Receive Only)
- 87.5-108MHz FM Radio (Receive Only)
- 50W Maximum Transmit Power
- 4 Transmit Power Levels
- 999 Total Custom Memory Channels
- Dual Frequency Display
- Remote Head Mounting Capability
- Three Color Selectable LED
- Repeater Capability
- GMRS Repeater Operation Mode (Second KG-1000G Required)
- Standard and Non-Standard CTCSS/DCS
- Split CTCSS/DCS Tone Support
- Priority Channel Scanning
- Frequency Scanning
- CTCSS/DCS Tone Scan
- Simultaneous Scanning on A/B Areas
- Auto-Detect AM Transmissions
- Dual Speakers with Independent Volume Controls
- Dual 3.5mm External Speaker Ports
- Backlit DTMF Speaker Microphone
- Incoming Caller ID Display
- DTMF Encoding and Decoding
- Channel Name Edit and Display
- Group Calls, All Call and Selective Call
- 8 Group Descramble
- Companding
- Wide/Narrow Bandwidth Selectable
- Busy Channel Lockout
- APO Power Management
- English Voice Prompts
- Roger Beep Enable/Disable
- Minimum Operating Voltage Alarm
- Stun/Kill Function
- Single Tone Pulse Frequency
- Keypad Lock
- Cooling Fan
- Adjustable Cooling Fan Control
- Automatic Temperature Testing
- Timeout Timer
- PC Programmable
- 3 Configurable Front Panel Buttons
- Reset
Programming the KG-1000G
Programming the Wouxun KG-1000G may seem daunting at first, but it is actually a relatively simple and straightforward process. You can do it directly from the DTMF keypad on the speaker microphone or through a PC using the Wouxun KG-1000G programming software.
Direct from the radio
If you already know how to program frequencies into the Wouxun KG-UV920P-A or other Wouxun mobile radios, programming the KG-1000G directly from the radio itself will be much the same experience. If you haven't programmed a Wouxun mobile before or you are new to programming any two way radio, no worries. The KG1000G owners manual is carefully written in plain English and is easy to understand, even when explaining some of the advanced features of the radio.
The KG-1000G menu consists of 54 options. Default settings are bold.
Menu # | Menu Item | Description | Option |
---|---|---|---|
01** | STEP | Step frequency settings | 2.5k to 100.0k|5k |
02 | W/N | Wide/Narrow bandwidth settings | NARR (12.5k)|WIDE (25k) |
03 | MPOWSET | Medium level power settings | MPOW1 (20W)|MPOW2 (10W) |
04** | OFF-SET | Offset frequency settings | 0-999.995|0 |
05 | ROGER | Roger beep prompt settings | OFF|BOT|EOT|BOTH |
06 | BEEP | beep prompt settings | ON|OFF |
07 | VOICE | voice prompt settings | ON|OFF |
08 | BCL | Busy Channel Lockout | ON|OFF |
09 | SP-MUTE | Mute Settings | QT|QT*DTMF|QT+DTMF |
10 | SC-REV | Scan Mode | SE|TO|CO |
11 | TOT | Timeout Timer | 1-60 minutes|2MIN |
12 | TOA | Transmission overtime alarm | 1-10 seconds|OFF|5 |
13 | ANI-SW | Caller ID TX Settings | ON|OFF |
14 | RING | Ring time | 1-10 seconds|OFF|3 |
15 | ANI-EDIT | Sets caller ID | 100-999999 |
16 | DTMFST | DTMF sidetone settings | DT-ST|ANI-ST|DT+ANI|OFF |
17 | PTT-ID | Caller ID TX mode | BOT|EOT|BOTH |
18 | TX-LED | TX LED color | RED|ORG|GREEN|OFF |
19 | WT-LED | Standby LED color | ORG|GREEN|OFF|RED |
20 | RX-LED | RX LED color | GREEN|OFF|RED|ORG |
21 | DEL-CH | Deleting a channel | 999 channels (Priority Channels not deletable) |
22*** | CH-NAME | Edit a channel name | Name*** |
23 | PRICH-SW | Priority channel switch | ON|OFF |
24 | SPK-CONT | Speaker settings | SPK1|SPK2|SPK1+2 |
25 | AUTOLOCK | Keypad auto lock | ON|OFF |
26 | RX-CTC | Receiving CTCSS | 1-50|OFF |
27 | RX-DCS | Receiving DCS | 1-105|OFF |
28 | TX-CTC | Transmitting CTCSS | 1-50|OFF |
29 | TX-DCS | Transmitting DCS | 1-105|OFF |
30 | RPT-SPK | Repeater speaker switch | ON|OFF |
31 | RPT-PTT | repeater PTT switch | ON|OFF |
32 | RPT-SET | Repeater settings | RADIO|X-DIRPT|X-TWRPT|RPT-RX|T-W RPT |
33*** | SCAN-ADD | Scan add | ON|OFF |
34 | APO-TIME | Automatic power off | OFF|30MIN|60MIN|90MIN|120MIN|150MIN |
35 | ALERT | Single-tone pulse frequency | 1750Hz|2100Hz|1000Hz|1450Hz |
36 | COMPAND | Compander | ON|OFF |
37 | FAN-SET | Overheating detection | TX|HI-TE/TX|ALWAYS |
38 | LOW-V | Low Voltage Prompt | ON|OFF |
39 | SCRAM | Voice Descrambler | OFF|SCRAM 1-8 |
40**** | SC-QT | CTCSS/DCS scanner | DECODER|ENCODER|ALL |
41 | SC-CTC | Activate CTCSS scanner | [Press Menu to Activate] |
42 | SC-DCS | Activate DCS scanner | [Press Menu to Activate] |
43**** | SC-GROUP | Scan group settings | ALL|GROUP(01-10) |
44* | RC-SW | Remote control | ON|OFF |
45 | PF1-SET | Side key setting | OFF|STUN|KILL|MONI|INSPEC |
46 | RPT Tone | Repeater tone | OFF|ON |
47 | RESET | Reset | VFO|ALL |
48 | KEY-A | Assign Function Key A | FM-RADIO|SC-CTC|SC-DCS|OFF|B/SW|MENCH |H/M/L|VFO/MR|SET-D|TDR|SQL|SCAN |
49 | KEY-B | Assign Function Key B | FM-RADIO|SC-CTC|SC-DCS|OFF|B/SW|MENCH |H/M/L|VFO/MR|SET-D|TDR|SQL|SCAN |
50 | KEY-C | Assign Function Key C | FM-RADIO|SC-CTC|SC-DCS|OFF|B/SW|MENCH |H/M/L|VFO/MR|SET-D|TDR|SQL|SCAN |
51 | ABR | Display Backlight Timeout | OFF|ALWAYS|1-20S |
52***** | FM-RADIO | FM radio function | ON|OFF |
53***** | AUT.AM | AM frequency recognition | ON|OFF |
54***** | AM-SW | AM Receive | ON|OFF |
*Note: The menu item in red is available in the menu for display only. It can be modified through optional programming software.
**The menu item in yellow is available in VFO mode only.
***The menu item in green is available in Channel mode only.
****The menu item in violet is not available in repeater mode.
*****The menu item in orange is available on Area "A" only.
Programming with software
The KG-1000G uses the same PCO-003 USB programming cable as many other popular Wouxun mobile radios, including the KG-UV920P-A, KG-UV950P, and KG-UV980P. Simply follow the Wouxun KG-UV920P-A cable driver installation instructions and the programming cable should be ready to go.
Unlike the programming cable, the Wouxun KG-1000G programming software is specific to the radio and is currently available for Windows PCs only. The programming software is located under the Downloads tab on the Wouxun KG-1000G product page at Buy Two Way Radios.
KG-1000G Operation
Working the KG-1000G is almost exactly same as operating the KG-UV950P or KG-UV980P. In fact, it is based on the same form factor as the KG-UV980P, so the console, key layout and dual speakers are identical for both radios. It also uses the same KG-UV10A hand speaker microphone. The speaker microphone plugs into a jack located on the right side when facing the front panel. The location of everything else on the front panel is also the same as the aforementioned KG-UV980P, including the LCD display, dual volume control knobs and large channel knob.
The keys and their primary functions are listed in the chart below:
Button | Operation |
---|---|
UP ARROW | Select previous channel/frequency|Select menu option |
DOWN ARROW | Select next channel/frequency|Select menu option |
MAIN | Change master channel (A/B Area)/single tone pulse |
1-BAND | Change master channel/frequency |
2-MHz | Frequency/channel selection |
3-B/SW | Band switching/weather mode |
4-MEMCH | Save channel |
5-H/L | Set Power output (H/L) |
6-VFO/MR | Frequency mode/Channel mode switch |
7-SET-D | Frequency shift direction |
8-TDR | Single/dual display switch |
9-SQL | Set Squelch level |
0-SCRAM | Descrambler |
*-SCAN | Scanning |
#-LOCK | Keyboard lock |
MENU | Enter program menu|choose/set menu option |
EXIT | Exit program menu/cancel |
As a GMRS radio alone, the Wouxun KG-1000G is a great value. As a mobile/base station radio or repeater, it can add affordable, value added versatility to any GMRS operation.